Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Summary of Contents for TechLogix Networx SSF Single Mode Light Source
- Page 1 TL-SSF-TESTK-1 SSF™ Fiber Test Kit Manual...
- Page 2 Warning To avoid risk of eye damage, do not look into the laser when unit is on. Laser does not operate at visible wavelength. Light will not be visible when laser is active.
-
Page 3: Table Of Contents
Contents Handheld Optical Light Source Overview Functions Maintenance and Troubleshooting Warranty Handheld Optical Power Meter Overview Specifications Functions Maintenance and Troubleshooting Warranty... -
Page 4: Handheld Optical Light Source
Handheld Optical Light Source SSF™ Single Mode Optical Light Source SSF™ Multimode Optical Light Source WARNING 1. Do not look into the laser beam when unit is on. 2. To prevent damage to the instrument, do not use under high temperature, high pressure, wet, or other prohibited conditions. -
Page 5: Overview
Handheld Optical Light Source Overview The SSF™ Single Mode optical light source provides single to tri wavelength output, including 1310/1550nm wavelengths for single mode fiber. The SSF™ Multimode optical light source provides single to tri wavelength output, including 850/1300nm wavelengths for multimode fiber. - Page 6 Handheld Optical Light Source Specifications Type SSF™ Single Mode Light Source Wavelength (nm) 1310 / 1550 Emitter Type FP-LD Output Power (dBm) ≥-7dBM @1310 / 1550nm Output Power ±0.04 @ 20°C @ 15 min Modulation CW/270Hz/1KHz/2KHz @ others Fiber Type Connector Power Supply AAA 1.5V (3pcs batteries)
-
Page 7: Functions
Handheld Optical Light Source Functions Label Area: Light Source will read SM (Single Mode) or MM (Multimode) depending on model. Choose SM for single mode testing (1310/1550nm) or MM for multimode testing (850/1300nm). Power On/Off: Press and hold for 1 second to turn the unit on or off. - Page 8 Handheld Optical Light Source Wavelength: (nm) 1310/1550: Single mode fiber testing (SSF-LS100SM) 850/1300: Multimode fiber testing (SSF-LS100MM) Battery Indicator: displays when battery power in use. The capacity shown will decrease with battery power. Replace batteries as needed. Auto Shut-off: The light source will automatically shut off when idle for ten minutes.
- Page 9 Handheld Optical Light Source Operation Warning 1. Do not look into the laser beam when unit is on. Light emitted is infrared and not visible to the human eye. To avoid the risk of eye damage, do not look into the laser at any time when the unit is active.
-
Page 10: Maintenance And Troubleshooting
Handheld Optical Light Source Maintenance and Troubleshooting 1. Always keep the connector ports of the light source clean. 2. Use the regulated optical connector for testing. 3. Shut off the power and cover laser with dust-proof cap after use. 4. Plug in/remove adapters carefully. 5. -
Page 11: Warranty
Handheld Optical Light Source Warranty Caution: Do not attempt to repair as doing so will void warranty. This Optical Light Source is covered by an 18 month warranty 1. We warrant that this power meter will be free from defects in material and workmanship for 18 months. -
Page 12: Handheld Optical Power Meter
Handheld Optical Power Meter SSF™ Optical Power Meter Warning 1. When using light source with power meter, do not look into the laser beam when unit is on. Light emitted is infrared and not visible to the human eye. To avoid the risk of eye damage, do not look into the laser at any time when the unit is active. -
Page 13: Overview
Handheld Optical Power Meter Overview The SSF™ optical power meter is a handheld optical power meter which can be used for absolute optical power measurements and relative loss measurements on both single mode and multimode fibers. Model Wavelength: 850, 1300, 1310, 1490, 1550, 1625nm Measurement Range: -70 - +10dBm Features •... -
Page 14: Specifications
Handheld Optical Power Meter Specifications Wavelength (nm) 800 - 1650nm Detector Type InGaAs Measurement Range (dBm) -70 - +10 -50 - +26 Accuracy <±3% (-10dBm, 22°C) Calibrated Wavelength 850, 1300, 1310, 1490, 1550, 1625 (nm) Resolution (dB) Linearity: 0.1%, Non-linearity: 0.01 dBm Optical Connector SC, LC with Adapters Power Supply... -
Page 15: Functions
Handheld Optical Power Meter Functions Power On/Off: Press and hold for 2 seconds to turn the unit on or off. Auto Shut-Off Selection: Press this key quickly to turn the auto shut-off function on or off. When auto shut-off is active the unit will automatically shut off after ten minutes idle. - Page 16 Handheld Optical Power Meter Wavelength: (nm) 850/1300: Multimode fiber testing 1310/1550: Single mode fiber testing Battery Indicator: displays when battery power in use. The capacity shown will decrease with battery power. Replace batteries as needed. Auto-off: the power meter will automatically shut off when idle for ten minutes.
- Page 17 Handheld Optical Power Meter Operation Turning the Unit On/Off 1. Press and hold for 1 second to turn on the unit. Press and hold for two seconds to power off the power meter. 2. To turn the auto shut-off function on or off, with the light source turned on press the 3.
-
Page 18: Maintenance And Troubleshooting
Handheld Optical Power Meter Maintenance and Troubleshooting 1. Always keep the connector ports of the power meter clean. 2. Use the regulated optical connector for testing. 3. Shut off the power and cover laser with dust-proof cap after use. 4. When using AC adapter, ensure power supply is within the required voltage range. -
Page 19: Warranty
Handheld Optical Power Meter Warranty Caution: Do not attempt to repair as doing so will void warranty. This Optical Power Meter is covered by an 18 month warranty 1. We warrant that this power meter will be free from defects in material and workmanship for 18 months.
Need help?
Do you have a question about the SSF Single Mode Light Source and is the answer not in the manual?
Questions and answers