Use And Operation - Honeywell HL10 Series User Manual

Hide thumbs Also See for HL10 Series:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION (CONTINUED)
IMPORTANT:
• Do not replace or lengthen the exhaust hose as this could cause the unit to malfunction.
NOT RECOMMENDED
WARNING: Any warranties included with this product will be voided if an extra extension hose is added
to the originally provided installation kit or if the installation is performed differently than the manufactur-
er's instructions, without proper consultation. Please contact Customer Support for help with installation
procedures if needed.
The supplied exhaust hose has a diameter of 5.9 inches (15 cm) and can be extended from 10.6"
The supplied exhaust hose has a diameter of 5 inches (12.7cm) and can be extended from 12 inches
to 47 inches (30cm to 120cm).
inches to 59" inches (27 cm to 150 cm).
Do not bend (to the extent shown below) the exhaust hose. A bent hose will block exhaust air and
cause the unit to malfunction or shut-off.
Make sure the back of the unit is at least 50 cm / 20 inches away from the wall. Do not place the unit
in front of curtains or drapes as this could obstruct the airflow.
USE & OPERATION
CONTROL PANEL
TOUCH SCREEN CONTROL PANEL
Model with Heat Mode
(2)
(4)
HIGH
COOL
MID
DRY
LOW
FAN
HEAT
(1)
Timer Control
/ Sleep Control
(4)
Mode Control
POWER CONTROL
The Power Control turns the unit on and off. When the unit is plugged in, this button lights up indicating
The Power Control
it is in a Standby Mode ready to be switched on anytime.
outlet, the POWER indicator light will illuminate red indicating the unit is in a Standby Mode, ready to be
switched on at anytime. The air vent will automatically open when the unit is turned ON and automatical-
ly close when unit is turned OFF.
(3)
(1)
(6)
(5)
POWER
TIMER
TIMER
o
C
F
o
SLEEP
WATER
SLEEP
FULL
(2)
Fan Speed Control
(5)
Power Control / Standby Mode
turns the unit on and off. When the unit is plugged into an appropriate electrical
EN
50 cm / 20"
RECOMMENDED
Model without Heat Mode
(2)
(4)
HIGH
COOL
MID
DRY
LOW
FAN
(3)
(6)
*Applicable for models with Heating feature only.
4
(3)
(1)
(6)
POWER
TIMER
TIMER
o
C
F
o
SLEEP
WATER
SLEEP
FULL
Timer / Temperature Set Controls
Indicator Lights
Warning Light (when flashing)
(5)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents