Water Condensation Drainage - Honeywell HL10 Series User Manual

Hide thumbs

Advertisement

Table of Contents

WATER CONDENSATION DRAINAGE

WATER CONDENSATION DRAINAGE
When there is excess water condensation inside the unit, the local air conditioner stops running and
When there is excess water condensation inside the unit, the local air conditioner stops running and
When there is excess water condensation inside the unit, the air conditioner stops running and shows a
When there is excess water condensation inside the unit, the air conditioner stops running and shows a
shows a warning light (the WATER FULL indicator illuminates with a red light). This indicates that the
shows a warning light (the Power Control button flashes with a red light). This warning light indicates that
warning light (the WATER FULL indicator illuminates with a red light). This indicates that the water
warning light (the Power Control button flashes with a red light). This warning light indicates that the
water condensation needs to be drained using the following procedures:
the water condensation needs to be drained using the following procedures:
condensation needs to be drained using the following procedures:
water condensation needs to be drained using the following procedures:
Manual Draining for Cooling & Dehumidifier Mode
Manual Draining for Cooling, Heating* & Dehumidifier Mode
Manual Draining for AC & Dehumidifier Mode
Water may need to be drained in high humidity areas.
1.
Unplug the unit from power source.
2.
Place a shallow pan under the lower drain plug.
Place a shallow pan under the lower rubber drain plug.
See diagram.
3.
Remove both the plastic cap and lower drain plug.
Remove the rubber drain plug.
4.
Water will drain out and collect in the shallow pan.
5.
After the water is drained, replace the rubber drain plug.
After the water is drained, replace the lower drain plug
firmly.
6.
You can now turn on the unit.
Continuous Draining for Dehumidifier Mode
While using the unit in dehumidifier mode, continuous
drainage is recommended.
1.
Unplug the unit from the power source.
2.
Remove the upper drain plug.
Remove the upper/lower rubber drain plug.
Some residual water may spill so please have a pan to
collect the water.
3.
Connect the drain tube (included) to the upper or lower
Connect the drain connector to a ¾" hose or standard
drain (whichever is more convenient for your space).
garden hose (not included).
See diagram.
4.
The water can be continuously drained through the
drain tube into a floor drain or bucket.
5.
Replace the drain plug.
6.
You can now turn on the unit.
Shallow Pan
(Not included)
*Applicable for models with Heating feature only.
EN
9
Plastic Cap
Lower
& Lower
Rubber
Drain Plug
Drain Plug
Upper Rubber
Upper
Drain Plug
Drain Plug
Drain Tube (included):
Dia. 0.9" (2.2cm)
Drain Tube
Length: 29.3" (74.5cm)

Hide quick links:

Advertisement

Table of Contents
loading

  Also See for Honeywell HL10 Series

  Related Manuals for Honeywell HL10 Series

Table of Contents