Sonar Operation; Automatic - Lowrance LMS-350A Installation And Operation Instructions Manual

SONAR OPERATION

AUTOMATIC

When the LMS-350A is first
turned on, the Automatic fea-
ture is enabled. This is indi-
cated by the word "AUTO" at
the top of the screen. The Auto-
matic feature adjusts the sensi-
tivity and range so the bottom
signal is displayed in the lower
half of the screen at all times.
Remember, when the LMS-350A is in the automatic mode, you have a
limited adjustment range on the Sensitivity control and no control over the
Range. Zoom adjusts differently in automatic than manual, also.
To turn Automatic off, first press
the AUTO key. A menu ap-
pears at the bottom of the
screen above the left and right
arrows. Press the left arrow
key to switch to the manual
mode. The letters "Man" ap-
pear in the upper left corner of
the display, indicating the unit
is in the manual mode. To turn
Automatic on, press the AUTO
key again, then press the right
arrow key.
14