Ethernet Device Connection - Lowrance HDS Live Installation Manual

installation such that the load/current draw on each side of the
power node is equal.
Ú Note:
1 LEN (Load Equivalency Number) equals 50 mA current
draw.
Ú Note:
Do not connect the NMEA 2000 power cable to the same
terminals as the engine start batteries, autopilot computer, bow
thruster or other high current devices.

Ethernet device connection

Connection of network devices can be made directly to the
Ethernet port, or via a network expansion device to the Ethernet
port.
Ethernet connector details
Pin Purpose
1
Transmit positive TX+
2
Transmit negative TX-
Wiring | HDS Live Installation Manual
4
3
5
2
1
Unit socket (female)
25