Declaration Of Conformity - Techne IFB-51 Instruction Manual

This product
harmonised standards for radio frequency
interference and may be expected not to
interfere with, or be affected by, other equipment with
similar qualifications. We cannot be sure that other
equipment used in its vicinity will meet these standards
Product
Manufacturer
This declaration of conformity is issued under the sole responsibility of the manufacturer
The object of the declaration described above is in conformity with the relevant Union Harmonisation Legislation:
References to the relevant harmonised standards used or referen
to which conformity is declared:
IEC/EN 61010-1:2001
IEC/EN 61010-2-010:2003
IEC/EN 61326-1:2006
Declaration of Conformity is also available to view online at www.techne.com
meets the applicable
EU Declaration of Conformity
Laboratory Equipment
Cole-Parmer Ltd
Beacon Road
Stone, Staffordshire
ST15 0SA
United Kingdom
Object of Declaration
Low Voltage Directive
EMC Directive
RoHS Directive
Signed for and on behalf of the above manufacturer
Additional Information
Place of Issue
Date of Issue
Authorised Representative
Title
Signature
and so we cannot guarantee that interference will not
occur in practice. Where there is a possibility that injury,
damage or loss might occur if equipment malfunctions
due to radio frequency interference, or for general
advice before
File Number
Authorised
Representative
Industrial Fluidised Baths
(reference the attached list of catalogue numbers)
2006/95/EC
2004/108/EC
2011/65/EC
Safety requirements for electrical equipment for
measurement, control and laboratory use.
Part 1: General requirements.
Particular requirements for laboratory equipment for the
heating of materials.
Electrical equipment for measurement, control and
laboratory use. EMC requirements.
Part 1: General requirements.
Year of CE Marking: 1996
Stone, Staffordshire, UK
May 2015
Steve Marriot
Technical Director
31 31
use, contact the
P225
Cole-Parmer
Beacon Road
Stone, Staffordshire
ST15 0SA
United Kingdom
manufacturer.