Audio Recording; Recording Screen; Record An Audio File; Start And Finish An Audio Recording - Philips VideoTracer DVT3120 User Manual

5 Audio recording

Recording screen

1
Recording mode
1
Recording quality
2
Current memory card capacity
3
Battery status
4
Audio time
5

Record an audio file

Before you start recording:
• Make sure your device has enough battery power left.
When the battery is almost discharged, the battery
icon on your display will start flashing red.
When the battery is empty, the device will turn off and
your current recording will automatically be saved.
• Set the desired preferences for your recording and
make a test recording in order to achieve the best
recording results. For more information about recording
settings, see Audio recording
Note
• Be careful not to cover the microphones while
recording. This might result in a lower recording
quality.
• Do not remove the memory card while recording. This
might result in damaging the recorded file.
• If the recording time of your current recording exceeds
the available storage capacity, the recording will stop.
In this case, delete files from your device to make
more storage available.
12 Audio recording
2 3 4
5
settings.

Start and finish an audio recording

1
On the start screen, press the Audio recording button
on the top of the device.
X The device vibrates once.
X The Record/Status LED flashes orange.
2
To finish recording, press the Audio recording button
on the top of the device.again.
X The device vibrates once.
X The Record/Status LED glows green.
X The recording is automatically saved to your
audio recordings folder.

Mark important recordings

You can mark important recordings in order to prevent
them from being deleted by loop recording.
• During recording, shortly press the Infrared button.
X An orange star appears in the bottom right corner
of the recording.
Tip
• You can also mark the reocrding after you have
finished recording. For more information, see
important files.

Use the Noise cut feature

Turn the Noise cut feature on in order to reduce
background noise while recording. This way, especially
audio recordings sound clearer. You can activate the
Noice cut feature in the audio recording settings in the
Settings menu.
Note
• When Noise cut is enabled, you will see
top of the starting screen.
Mark
on the