Advertisement
14
FORD MODEL A
Lubrication
of the Clutch Bearing
The clutch pilot bearing at the front end of the clutch is
thoroughly packed
with
grease when the car is assembled, and
it will not be necessary to lubricate this bearing until such time
as the clutch may be disassembled.
When the clutch is disas-
sembled the be
a
ring should be repacked with a good grade of
cup grease.
Approximately
every 2000 miles
,
lubricate the clutch release
be aring. This is done by remo ving the hand hole cover and
turning the bearing until the lubricator
fitting is at the top.
Lubricate the bearing by means of the compressor grease gun.
NOTE:
The clutch is a
dry
disc clutch and under no
cir-
cumstances
·
s hould it be oiled.
Advertisement
