What To Do If; Simplified Eu Declaration Of Conformity - Becker Centronic VarioControl VC320 Assembly And Operating Instructions Manual

Problem
Drive is not functioning.
Drive is running in the wrong direc-
tion
The radio receiver does not perform
manual run commands.
The radio receiver does not perform
automatic run commands.
Switching times cannot be set on re-
ceiver.
Tubular drive does not operate at the
set switching time.
Set switching times change.

Simplified EU declaration of conformity

Becker-Antriebe GmbH hereby declares that this radio control system com-
plies with Directive 2014/53/EU.

What to do if...?

Check connection.
Swap connecting wires
Changing direction of rotation via
master transmitter (see Checking
that the running direction is correct
[} 29]).
Program transmitter.
Program transmitter.
Set the transmitter's slide switch to
.
Use transmitter with /
switch.
Switch
Switch the slide switch on one trans-
mitter from
is already at
back to
Frequent 230 V AC power cuts.
Fluctuations in the 50 Hz mains fre-
quency.
Use a "TimeControl" transmitter and
adjust the desired switching time
there.
Remedy
and
slide
/ slide switch to
to . If the slide switch
, switch it to
.
.
.
and
35 - en