Pc/Av Mode; Source Detection; Key Repeat Time; Power Led On - Samsung CJ79 Series User Manual

PC/AV Mode

Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
• Set to PC when connected to a PC.
• Set to AV when connected to an AV device.
― This feature is only available on the widescreen models that include 16:9, 16:10 and 21:9.
― If the monitor is in
HDMI ,DisplayPort or Thunderbolt3 / USB-C
or power saving mode activates, press the JOG button to display the function-button screen and then select
the icon. You can select PC or AV.

Source Detection

Select either Auto or Manual as the method to recognize input signal.
― Not available when
PIP/PBP Mode is set to On.

Key Repeat Time

Acceleration, 1 sec, or 2 sec can be selected. If
when a button is pressed.
mode and the screen says Check Signal Cable
No Repeat is selected, a command responds only once

Power LED On

Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.

Reset All

Return all the settings for the product to the default factory settings.

Information

View the current input source, frequency and resolution.
40