Samsung CJ79 Series User Manual

Samsung CJ79 Series User Manual

Curved monitor
Hide thumbs Also See for CJ79 Series:
Table of Contents

Advertisement

USER MANUAL
Curved Monitor
CJ79*
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
An administration fee may be charged if either
‒ (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
‒ (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.

Advertisement

Table of Contents
loading

Summary of Contents for Samsung CJ79 Series

  • Page 1 © Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than that of Samsung Electronics are owned by their respective owners.
  • Page 2: Table Of Contents

    Before Using the Product Connecting and Using a Source Device Picture Securing the Installation Space Read below before installing the monitor. SAMSUNG MAGIC Bright Precautions for storage Connecting and Using a PC Brightness Safety Precautions Connection Using the HDMI Cable...
  • Page 3 Table of contents PIP/PBP System Troubleshooting Guide PIP/PBP Mode DisplayPort Ver. Requirements Before Contacting Samsung Customer Service Center Size HDMI Mode Testing the Product Checking the Resolution and Frequency Position FreeSync Check the following. Sound Source Eco Saving Plus Q & A...
  • Page 4: Before Using The Product

    High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.)
  • Page 5: Cleaning

    • Do not disconnect the power cord while the product is being used. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • Keep the power socket where the power cord is connected unobstructed.
  • Page 6: Installation

    ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a • Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
  • Page 7: Operation

    ‒ Be sure to power off the product and disconnect the power cord when water or other foreign ‒ Contact Samsung Customer Service Center for repairs. substances have entered the product. Then contact Samsung Customer Service Center. • To move the product, first disconnect all the cables from it, including the power cable.
  • Page 8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage • Do not touch the screen when the product has been turned on for an extended period of time as it burn-in or defective pixels.
  • Page 9: Preparations

    Chapter 02 Preparations Parts Parts Description Multi directional button that helps navigate. ― The JOG button is located on the rear left side of the product. The button JOG Button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as •...
  • Page 10: Direct Key Guide

    Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if Eye Saver Mode is enabled.
  • Page 11: Function Key Guide

    Function Key Guide ― To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes. PRESS(ENTER): The selected item will be applied.
  • Page 12 When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Button could be used as below. JOG Button Action UP/DOWN...
  • Page 13: Changing Brightness, Contrast And Eye Saver Mode Settings

    ― This menu is not available when is weak, usually due to a problem with the volume of an input device. Bright is set to Dynamic Contrast mode. SAMSUNG MAGIC ― To activate the ― This menu is not available when Mute function, access the...
  • Page 14: Types Of Ports

    Types of Ports ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. DC 24V HDMI IN DP IN...
  • Page 15: Upgrading The Software Via Usb

    Upgrading the Software via USB When the message as shown in the following figure is displayed on the monitor, select upgrade the software. Be sure to insert the USB disk into the USB port marked out with the blue box as shown in the figure below.
  • Page 16: Adjusting The Product Tilt And Height

    Adjusting the Product Tilt and Height Note Before upgrading through USB disk, you need to format the USB disk into the FAT32 format. ― The color and shape of parts may differ from what is shown. Specifications are subject to change without Make sure only the BIN file for upgrade is in the USB disk.
  • Page 17: Anti-Theft Lock

    Anti-theft Lock Precautions for moving the monitor ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
  • Page 18: Installation

    Installation Removing the Stand ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. Place the protective Styrofoam (cushion) included Grab the stand with one hand and use the thumb Lift and remove the stand.
  • Page 19: Attaching The Wall-Mount Bracket

    ‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall- mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
  • Page 20: Attaching The Stand

    Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. Place the protective Styrofoam (cushion) included Attach the stand to the back of the monitor, in the Grab the stand with one hand and use your other...
  • Page 21: Connecting And Using A Source Device

    Chapter 03 Connecting and Using a Source Device Read below before installing the monitor. Connecting and Using a PC Check the shapes of both ends of the cables that came with the monitor, and check the shapes and Select a connection method suitable for your PC. ―...
  • Page 22: Connection Using An Hdmi-Dvi Cable

    Connection Using an HDMI-DVI Cable Connection Using an DP Cable Check to make sure that the power cables for the monitor and external devices, such as Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet.
  • Page 23: Connection Using A Thunderboltâ„¢ 3 Cable Or Usb Type-C Cable

    ― Make sure that the Thunderbolt™ 3 or USB Type-C cable complies with the Thunderbolt™ 3 or USB Type-C specification. Otherwise, your devices may be damaged. A Samsung branded cable is recommended. ― When the product is connected to a USB Type-C notebook, the product supports up to 60 Hz vertical frequency at the maximum resolution (3440 x 1440).
  • Page 24: Connecting To Headphones

    Connecting to Headphones Connecting the Product to a PC as a USB HUB Connecting a PC to the Product ― The product can function as a USB hub when connected to a PC via a Thunderbolt™ 3 cable or USB Type-C cable.
  • Page 25: Utilizing The Product As A Usb Hub

    ― Performance can vary, depending on the USB version supported by the external device. Utilizing the Product as a USB HUB ― An external mass-storage HDD requires an external power supply. Be sure to connect it to a power source. (Refer to the device user manual) Using the product as a hub, connect and use various source devices with the product at the same time.
  • Page 26: Tidying Up The Connected Cables

    Tidying Up the Connected Cables 170 mm Grab the stand with one hand and use the thumb Grab the stand with one hand and use the thumb Connect cables to the appropriate ports. Ensure that the length of the cables, within the on your other hand to remove the COVER-REAR- on your other hand to remove the COVER-STAND range indicated in the image, is at least 170 mm,...
  • Page 27: Correct Posture To Use The Product

    Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http:// www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
  • Page 28: Picture

    Custom: Customize the contrast and brightness as required. • Standard: Obtain a picture quality suitable for editing documents or using Internet. SAMSUNG MAGIC Bright • Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
  • Page 29: Brightness

    You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. SAMSUNG Bright is set to Cinema Dynamic Contrast mode.
  • Page 30: Samsung Magic Upscale

    SAMSUNG MAGIC Upscale Eye Saver Mode Upscale function can enhance the layers of the picture details and the vividness of the picture. Set to an optimum picture quality suitable for eye relaxation. SAMSUNG MAGIC The function has more obvious effects on low-resolution pictures.
  • Page 31: Picture Size

    Picture Size Screen Adjustment ― This menu is only available when Change the picture size. Picture Size is set to Screen Fit Mode. When a 480P or 576P or 720P or 1080P signal is input in mode and the monitor can display normally, select ―...
  • Page 32: Pip/Pbp

    Chapter 05 PIP/PBP A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ ― PIP/PBP mode is compatible with Windows 7, Windows 8, and Windows 10. ―...
  • Page 33: Size

    Size Sound Source Select the size and aspect ratio of the sub-screen. Set which screen you want to hear the sound for. ― The white area of the icon means that the Sound Source comes from the main screen/sub-screen or the left/ •...
  • Page 34: Source

    Source Picture Size PIP Mode (available in PIP mode(Size PIP Mode (available in PIP mode (Size Select the source for each screen. Select the image size for sub-screen. ― The input source for the main screen changes. mode ― With the exception of the current input source, the other two input sources can be selected. ―...
  • Page 35: Contrast

    Contrast PBP Mode (available in PBP mode(Size Set the Picture Size for each of the divided screens. mode PIP Mode (available in PIP mode(Size • Auto: Display the picture according to the aspect ratio of the each screen input source. Adjust the contrast level for sub-screen.
  • Page 36: Onscreen Display

    Chapter 06 OnScreen Display A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Language from what is shown. Specifications are subject to change without notice to improve quality. Set the menu language.
  • Page 37: System

    Chapter 07 System A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ HDMI Mode from what is shown. Specifications are subject to change without notice to improve quality. Select the HDMI mode to use.
  • Page 38: Freesync

    The response rate during the game may fluctuate depending on the resolution. A higher resolution generally decreases the response rate. • The sound quality of the monitor may be degraded. ― If you encounter any issues when using the function, contact the Samsung Service Center.
  • Page 39: Eco Saving Plus

    Eco Saving Plus Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel. ― This option is not available when SAMSUNG Bright is in Dynamic Contrast mode. MAGIC ― This menu is not available when Game Mode is enabled.
  • Page 40: Pc/Av Mode

    PC/AV Mode Power LED On PC/AV Mode to AV. The picture size will be enlarged. Configure the settings to enable or disable the power LED located at the lower part of the product. This option is useful when you view a movie. •...
  • Page 41: Installing The Software

    Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 10 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work properly if you do not restart the computer after the installation.
  • Page 42: Troubleshooting Guide

    Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
  • Page 43 Sound issue Not Optimum Mode is displayed. This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product. There is no sound. Change the maximum resolution and frequency to suit the product performance, referring to Standard Check the connection of the audio cable or adjust the volume.
  • Page 44: Q & A

    Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Refresh rate under Monitor settings. •...
  • Page 45: Specifications

    ― This device is a Class B digital apparatus. Power Supply AC100-240V~ 50/60Hz ― For detailed device specifications, visit the Samsung Electronics website. Based on the AC voltage of the adapter. For the DC voltage of the product, refer to the product label.
  • Page 46: Standard Signal Mode Table

    Standard Signal Mode Table Synchronization Horizontal Frequency 30 – 152 kHz Vertical Frequency 50 – 100 Hz Resolution Optimum resolution 3440 x 1440 @ 50 Hz (HDMI) 3440 x 1440 @ 60 Hz (DisplayPort, Thunderbolt) Maximum resolution 3440 x 1440 @ 100 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted.
  • Page 47 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1280 x 800 49.702 59.810 83.500 VESA, 1280 x 1024 63.981 60.020 108.000 VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 RB 60.000...
  • Page 48: Appendix

    • Use of supplies or separatly sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. • Remodeling or repairing the product by customer.

This manual is also suitable for:

C34j791wt series

Table of Contents