Table of Contents
Advertisement
Using the Belkin Wireless LAN Utility
WPA (with server) Settings
Choose this setting if your network uses a radius server to distribute
keys to the clients (network cards). WPA (with server) is typically used
in business networks.
1.
From the Security Mode drop-down menu, select "WPA (with
Radius Server)".
2.
Enter the IP address of the radius server into the "Radius
Server" fields.
3.
Enter the radius key into the "Radius Key" field.
4.
Enter the key interval. The key interval is how often the keys are
distributed (in packets).
5.
Click "Apply Changes" to finish. You must now set all clients
(network cards) to match these settings.
IMPORTANT: You must now set all wireless network cards/
adapters to match these settings.
23
23
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
