Auto Restart; Software Update - Samsung Galaxy J2 Pure User Manual

Settings
If you reset your device to factory default settings with the Factory Reset Protection
(FRP) feature activated, you must enter the user name and password for a registered
Google Account to regain access to the device. You will not be able to access the
device without the correct credentials.
If you reset your Google Account password, it can take 24 hours for the password
reset to sync with all devices registered to the account.
Before resetting your device:
1. Verify that the information you want to keep has transferred to your storage
area.
2. Log in to your Google Account and confirm your user name and password.
To reset your device:
1. From Settings, tap
2. Tap Reset and follow the prompts to perform the reset.
3. When the device restarts, follow the prompts to set up your device.

Auto restart

Optimize your device by restarting it automatically at set times. Any unsaved data will
be lost when the device restarts.
1. From Settings, tap
2. Tap to activate Auto restart, and then set the following parameters:
• Time: Set the time of day to restart your device.
• Day: Select the day of the week to automatically restart your device.

Software update

Check for and install available software updates for your device.
◌
From Settings, tap
• Check for updates: Manually check for software updates.
• Continue update: Resume an update that was interrupted.
General management > Reset > Factory data reset.
General management > Reset > Auto restart.
Software update for the following options:
116