Page 2
WARNING ALWAYS FOLLOW SAFETY PRECAUTIONS Secure the cabinet Never climb, sit or Only Adults should stand on the cabinet. move the cabinet. to avoid fall down. Push CAUTION Death or serious injury may occur when children climb on audio and/or ...
Page 3
CAUTION! DO NOT allow anyone to sit, stand or climb on the cabinet. DO NOT lift the cabinet. DO NOT block the ventilation holes used for air circulation. DO NOT overload objects on the cabinet shelf. (Top of cabinet maximum ...
Page 4
The information contained in this documentation is subject to change without notice. In no event will AVer Information Inc. be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or...
The following items are included in the package. Please check if each item is available before using. Concrete Anchor x 6 User Manual Drywall Anchor x 6 Anchor Screw x 6 X12 Cabinet Lock key x 4 Washer x 6 Cable Grommet x 2 Stacking Kits Tools Required For wall mount use.
Sides Top and Bottom Front and Back Sides Top and Bottom 1. Cabinet top cover 7. Power cable hole 10. Handle 8. Ventilation holes 11. Top cover lock 2. Ventilation holes 9. Handle 12. Ventilation holes 3. Finger Pull 4.
Installation [Note] 1. It is recommended to use cable ties or zip-tie (optional) to secure and manage cables. 2. It is recommended to allocate 2 persons for efficient device cabling. Door/Top Cover Lock For security, use the lock key to secure the door and top cover. ...
Charging the Cabinet 1. Use the included key to open the top cover. 2. Remove the top cover and accessory package. 3. Connect the power cord to power socket located on adapter drawer and wall outlet. 4. Pass the power cable through the cable grommet and install on the cabinet. ...
Adapter Configuration 1. Place the power adapter onto the adapter drawer in order. 2. Pass the DC-end of the adapter cable through the hole located on the back of adapter drawer. 3. Plug-in the AC-end of the adapter cable to the power AC socket. 4.
Cable Management 1. Use the included key to open the front door. 2. Route the adapter DC-end cable. Along with the V-shape routing groove. 3. Snap the locking piece until hear a "click" to firmly secure the DC-end cable. Remember to reserve enough length of power cable to connect the power plug of the device.
Wall Mount 1. Open the top cover. 2. There are 6 mount holes on the cabinet’s rear panel. (See the figure as below for exact mount holes locations). 3. Secure the cabinet to the wall studs for drywall mounting. Drill the holes at the wall studs through the drywall, and firmly tap the drywall anchors in until they are flush with the wall.
Stacking Installation The X12 cabinets can use the included stacking kits to stack cabinets and secure them together. The stacking installation is illustrated below: [Note] The maximum stack is 2 cabinets. 9 ...
Troubleshooting Q: Why are all of my devices plugged in but not charging? A: 1. Make sure power cords are undamaged. 2. Make sure power cords are firmly inserted into the available socket with stable current. 3. Make sure the power plug and current consumption are compliant with your country specification standards.
Specifications Model Capacity Mobile devices up to 15" Supported Devices Charging Type Fully Charging Power Specification Power Strip: 100-120V ~ 50/60Hz, 12A Front door: 2 points mechanism with key lock function. Padlock hole is combine with handle Top cover: 1 point key lock function. Security The key of front door and top cover use the same key.
Service and Warranty All of our products come with a quality and safety assurance. For customers located in North America, please visit the AVer USA support site for comprehensive RMA, Warranty, and Service information: http://averusa.com/classroom-technology/support/ For customers located outside North America, please visit AVer Global support site: http://www.aver.com/...
Need help?
Do you have a question about the X12 and is the answer not in the manual?
Questions and answers