Table of Contents
Advertisement
ELECTRIC VEHICLE SYSTEM
Charging Information
Remaining charging time and charging information is displayed on the
Multi-Information Display (MID) or 11.6" display (if equipped.)
If the POWER switch is turned to ON mode during charging, the current charging
status and the amount of time needed until charging is complete will be displayed
on the energy monitor.
After confirming, switch the POWER switch to OFF and turn off the display. The
POWER switch will turn off automatically after several tens of seconds.
Charging information and warning messages The first time the POWER switch is
turned to ON mode after charging is completed, a message detailing the results of
the charge is shown. Also, if an operation was attempted that could not be carried
out while charging, a warning message will be shown.
Follow the instructions in the message. The message may not be displayed if the
Remote Climate System has been used.
Refer to Owner's Manual for limitations and more details.
16
Hide quick links:
Advertisement
Table of Contents
