Regulatory Information; Fcc/Ic Requirements For Modular Approval - Laird RM024 Hardware Integration Manual

RM024 Hardware Integration Guide
Version 3.1
R I
EGULATORY NFORMATION

FCC/IC Requirements for Modular Approval

Agency Identifications Numbers
Family US/FCC
RM024 KQL-RM024
RM024 Family
*PART #
RM024-S125-C-XX
RM024-S125-M-XX
RM024-P125-C-XX
RM024-P125-M-XX
RM024-S10-C-XX
RM024-S10-M-XX
RM024-P10-C-XX
RM024-P10-M-XX
*Last two slots "XX" in Part # are used for custom setups. Can be values 01-99, aa-zz,-
01indicates FW version 1.3 and default configuration, -20 indicates FW version 2.0 and
default configuration
Antenna Information
The RM024 family has been designed to operate with the antennas listed below and having a
maximum gain of 9 dBi. The required antenna impedance is 50 ohms.
Item Part Number
1 WIC2450-A
2 NZH2400-MMCX
3 ID2450-RS36
3 IG2450-RS36
4 S151-6-PX-2450S
5 INT01.07.0100C
Note: The OEM is free to choose another vendor's antenna of like type and equal or lesser
gain as an antenna appearing in the table and still maintain compliance. Reference
FCC Part 15.204(c)(4) for further information on this topic.
To reduce potential radio interference to other users, the antenna type and gain
should be chosen so that the equivalent isotropically radiated power (EIRP) is not
more than that permitted for successful communication.
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/wireless
CANADA/IC
2268C-RM024
FORM FACTOR TX OUTPUT
Surface Mount 125mW
Surface Mount 125mW
Pluggable 125mW
Pluggable 125mW
Surface Mount 10mW
Surface Mount 10mW
Pluggable 10mW
Pluggable 10mW
Mfg.
Laird
Laird
Laird
Laird
Nearson
Taoglas
19
ANTENNA
U.FL
U.FL or chip
U.FL
U.FL or chip
U.FL
U.FL or chip
U.FL
U.FL or chip
Type Gain (dBi)
Chip 2
Microstrip 1
Panel 9
Omni 6
Dipole 5
Slot 2dBi
CONN-HIG_RAMP24