Table of Contents
Advertisement
1 General Information
1 General Information
Carefully read these instructions before installation and commissioning.
Save these instructions in the vicinity of the installation for future reference.
1.1
Scope of these instructions
These instructions describe the installation, commissioning, function and the operation of
the HeatBloC K35 DN 25 with 3-temperature mixing valve.
For other components of the installation, such as the pump, the controller or the modular
distribution manifold, please observe the instructions of the corresponding manufacturer.
The chapters called [specialist] are intended for specialists only.
1.2
Designated use
The HeatBloC may only be used in heating circuits taking into consideration the technical
limit values indicated in these instructions.
The HeatBloC must not be used in drinking water applications.
Improper usage of the HeatBloC excludes any liability claims.
This product complies with the relevant directives and is therefore labelled with the CE mark.
The Declaration of Conformity is available upon request, please contact the manufacturer.
Only use PAW accessories with the HeatBloC.
The wrapping materials are made of recyclable materials and can be disposed of
with recyclable materials.
2017/01
9936093x-mub-en – V01
3
Advertisement
Table of Contents
