Chicago Electric 42624 Assembly And Operating Instructions Manual page 4

17. Guard against electric shock. Prevent body contact with grounded surfaces such
as pipes, radiators, ranges, and refrigerator enclosures.
18. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools.
19. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not operate the tool.
20. Use proper size and type extension cord. If an extension cord is required, it must
be of the proper size and type to supply the correct current to the tool without heating
up. Otherwise, the extension cord could melt and catch fire, or cause electrical
damage to the tool. This tool requires use of an extension cord of 0 to 15 amps
capability (up to 50 feet), with wire size rated at 14 AWG. Longer extension cords
require larger size wire. If you are using the tool outdoors, use an extension cord rated
for outdoor use. (signified by "WA" on the jacket).
21. Secure work. Use clamps or vise to hold work when practical. It's safer than using
your hand, and it frees both hands to operate the saw.
22. Use recommended accessories. Consult this instruction manual for recommended
accessories. The use of improper accessories may cause risk of injury to persons.
23. Never stand on tool. Serious injury could occur if the tool is tipped, or if the cutting
edge is unintentionally contacted.
24. Never leave the tool running unattended. Turn the power off and do not leave the
tool until it comes to a complete stop.
25. Do not operate electric tools near flammable liquids or in gaseous or explosive
atmospheres. Motors in these tools may spark and ignite fumes.
26. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
Additional Safety Rules for Miter Saws
1. Do not disable blade guard. Do not saw without a proper operating blade guard in
place.
2. Examine blade before using. Before each use, examine blade for chips, cracks, or
other damage. Do not use if damaged.
3. Do not use without first mounting saw to a workbench.
4. Check for tightness on all saw adjustments before using.
5. Keep hands away from moving saw blade. If the workpiece to be cut is less than 4
inches long, do not hold with your hand, use a clamp. Do not remove jammed or
cutoff pieces until the saw blade has stopped and the Line Cord is unplugged.
SKU 42624 Page 4