VeriFone VX 675 User Manual page 3

To fully charge the Terminal, leave plugged into the powered
 Gently pull the latch located on the top of the terminal to unlock the paper roll cover
 Remove any partial roll of paper in the printer tray
 Loosen the glued leading edge of the new paper roll and unwind it past any glue
residue
 Drop the paper roll into the tray, ensuring the paper feeds from the bottom of the
roll
 Pull paper up past the glue residue
 Close the paper rollover gently, allowing a small amount of paper to extend outside
the printer door
 Tear the paper off against the serrated plastic strip in the printer
Ensure the VX675 is fully charged
USB cable until the LED indicator remains lit.
Replace paper rolls -VX675