Feature History For Configuring Layer 2 Switching - Cisco Nexus 7000 Series Configuration Manual

Feature History for Configuring Layer 2 Switching

Related Topic
Licensing
Release Notes
Standards
Standards
No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature.

Feature History for Configuring Layer 2 Switching

This table lists the release history for this feature.
Table 2: Feature History for Configuring Layer 2 Switching
Feature Name
Learning mode for VLANs
Layer 3 interface static MAC
addresses
show mac address-table
Layer 2 consistency
Cisco Nexus 7000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.x
22
Document Title
Cisco NX-OS Licensing Guide
Cisco Nexus 7000 Series NX-OS Release Notes
Title
—
Releases Feature Information
6.0(1) You can configure
conversational or
nonconversational learning
mode for VLANs.
4.2(1) You can configure a Layer 3
interface with a static MAC
address.
4.1(2) This display provides
additional information when
vPC is enabled and running.
4.1(2) The show forwarding
consistency l2 command
displays inconsistent entries
on the MAC address table
between the modules.
Configuring Layer 2 Switching