Configuring Vtp; Finding Feature Information; Information About Vtp - Cisco Nexus 7000 Series Configuration Manual

Configuring VTP

This chapter describes how to configure VLAN Trunking Protocol (VTP) and VTP pruning on Cisco NX-OS
devices.
This chapter includes the following sections:
•
•
•
•
•
•

Finding Feature Information

Your software release might not support all the features documented in this module. For the latest caveats
and feature information, see the Bug Search Tool at
for your software release. To find information about the features documented in this module, and to see a list
of the releases in which each feature is supported, see the "New and Changed Information"chapter or the
Feature History table in this chapter.

Information About VTP

Beginning with Cisco NX-OS Release 5.1(1), VTP and VTP pruning are supported for VTP version 1 and 2.
Before Release 5.1(1), only VTP transparent mode was supported.
Beginning with Cisco NX-OS Release 5.1(1), you can configure VLANs without actually creating the
Note
VLANs. For more details, see
Finding Feature Information, page 43
Information About VTP, page 43
Restrictions for Configuring the VLAN Trunking Protocol, page 46
Default Settings, page 46
Configuring VTP, page 47
Configuring VTP Pruning, page 50
Configuring a VLAN Before Creating the VLAN, on page
Cisco Nexus 7000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.x
5
C H A P T E R
https://tools.cisco.com/bugsearch/ and the release notes
34.
43