Advertisement
Power on Your IP45
Connect the power adapter to the power port on the rear panel of the IP45, and then plug in the power adapter to a
power source.
The PWR LED on the front panel will light up, indicating that the IP45 is now powered on.
Connecting to Your Network
Connect one end of a straight-through cable (not included with the IP45) to the WAN port on the rear panel of the
IP45, and the other end to your cable or DSL modem.
Ensure that your DSL or cable modem is powered on.
The WAN LED on the front panel of your device will light up, indicating proper connection to your modem.
Connect one end of the crossover cable provided with your IP45 to the IP45 LAN port, and the other end of the
cable to your computer. See the Nokia IP45 Security Platform User's Guide Version 3.5 on the CD-ROM for
information on using the DMZ, Console, and AUX ports
If you are connecting to a hub or a switch, use a straight-through cable.
The LAN LED will light up, indicating that the computer has connected. See the user's guide on the CD-ROM for
more information.
The examples below illustrate the proper cabling with and without the hub or switch.
Advertisement
