Espressione EM-1020 Manual page 13

Cleaning the filter and filter holder
Empty the filter using a small spoon or carefully tapping it against a surface so that any waste can be
collected.
Remove the filter.
Important
The metal parts on the filter holder and filter are very hot.
Rinse the filter and filter holder under hot water and dry.
D. Pre-programmed settings
The stainless steel EM-1020 automatic espresso machine allows you to pre-program 2 volumes of
espresso coffee very simply.
IMPORTANT
Two volumes of coffee can be programmed by default into your machine:
- Pre-program 1 (1 cup): 50 ml approximately
- Pre-program 2 (2 cups): 100 ml approximately
Programming 1 espresso cup
To pre-program the preparation of 1 espresso cup to your taste, follow the steps for preparing an espresso
(See section "Espresso function" page 18).
Place the cup on the cup rest grill.
When the TEMPERATURE light (h4) stops flashing, briefly press the Pre-programmed 1 cup espresso
button to the right and hold in this position. The espresso will begin to dispense.
When the desired volume of coffee is reached, release the button. The dispensing of coffee is stopped
immediately and the personalized setting is stored in the memory.
Programming 2 cups of espresso
The steps are identical to those for programming 1 cup. Simply place 2 cups on the cup rest grill and
activate the Pre-programmed 2 cup espresso button
.
IMPORTANT
The maximum volume that can be programmed for 1 cup is 150 ml; for 2 cups it is 250 ml
approximately.
The programmed settings can be changed at any time by following the same procedure.
IMPORTANT
You can serve yourself from the espresso machine manually by interrupting the dispensing of coffee
at any time. To do so, briefly activate the espresso button
rather than the Pre-programmed 1 cup button
or the previously activated button.
English
15