Settings In Tk-Suite - AGFEO AL-Module 4504 Installation Manual

English

Settings in TK-Suite

After you have installed the AL Module 4504 in the PBX and connected all the analogue
exchange lines required, you need to assign a number under „Assign externalnumber" and
Setup Call Distribution Day Service under „Incoming Calls"in TK-Suite to the respective
lines. Subsequently,you simply need to appoin texternal rights under „Outgoingcalls/Specify
external access for outgoing"' for outgoing exchangeline seizure.
Optionally, you can combine several exchanges to form a hunt group. Hunt groups are
useful, for instance, if you have a GSM adapter connected to lines 1 and 2. You could then
allocate both exchanges to a hunt group and specify in the LCR table that all calls made to a
mobile phone will use this group of lines.
10