Introduction; Features; Applications; Is-Webrt3N Card Web Interface - Vertiv Liebert IntelliSlot WEBRT3N User Manual

1 INTRODUCTION

1.1 Features

The Liebert IS-WEBRT3N card is a new generation SNMP (Simple Network Management Protocol) UPS
monitoring product. The card permits remote control of the UPS and enables reporting its current status.
The IS-WEBRT3N card is simple and easy to install: insert the card into a compatible UPS, install the
Liebert DeskPro-Net™ software on the included CD on a Windows® operating system and configure the IP
address. All other configuration may be done with a Web browser.
NOTE: Anti-virus software may prevent the identification of devices. If no cards are detected, disable
the anti-virus software. After the card is identified, you may re-enable anti-virus software without
interfering with device monitoring.
The IS-WEBRT3N card also provides shut-down, using Power Insight, for different operating systems. It
can be configured to send a shut-down command for such events as utility power failure and low battery.
1.1.1 Features
• Provides SNMP MIB to monitor and control UPS
• Auto-senses 10M/100M fast Ethernet
• Manages and configures via Telnet, Web browser or NMS
• Supports TCP/IP, UDP, SNMP, Telnet, SNTP, PPP, HTTP, SMTP protocol
• Supports HTTPS encryption for fully secure web-based management
• Sends both SNMP traps and e-mails for event notification
• Automatically e-mails a daily UPS history
• Matches with shut-down software to protect computer's file saving and shut down safely

1.2 Applications

1.2.1 IS-WEBRT3N Card Web Interface

The system administrator can use a Web browser to check the status of all UPSs where a IS-WEBRT3N
has been installed. The administrator can access a UPS by entering its IP address in the browser. When
utility power surges, sags or fails, the IS-WEBRT3N can, if so configured, also send the trap information to
the system manager to take proper action.

1.2.2 Liebert Web Card Provides Shut-down Utilities

A computer on the network with the IS-WEBRT3N card and DeskPro-Net Utility installed can locate all IS-
WEBRT3N cards on the network. Power Insight can be set up to close open files and perform a graceful
system shut-down when a UPS with a IS-WEBRT3N card experiences an input power failure or low
battery.
Vertiv | Liebert® IS-WEBRT3N™ Card User Manual | 5