Table of Contents
Advertisement
5 TELNET—REMOTE MONITORING
5.1 Introduction
The IS-WEBRT3N card supports multiple Network Management Systems and LAN protocols. After
installing and configuring the card, you have the same configuration selections using Telnet that are
avaialble through the Web page.
5.2 Telnet Configuration
1.
Click Start>Run and enter telnet and the IS-WEBRT3N cards IP address.
If the connection is successful, the Telnet window opens.
2. Press the Enter key. If the user name and password were set previously, enter those actual
values to gain access.
The Telnet main screen opens.
The main screen gives access to the following functions:
•
Set IP Address—sets up the IP address, Gateway address and Subnet Mask parameters.
•
Set SNMP MIB System—sets up the MIB system group parameters.
•
Set SNMP Access Control—sets up the Manager IP, Community, Access Permission.
NOTE: The configuration of Set SNMP Access Control is used only for SNMP Network Manager.
•
Set SNMP Trap Notification—Add the IP address of trap receivers, community string
(matching the NMS), type of traps to receive and whether the Destination IP Address should
receive traps to this list.
NOTE: The configuration of Set SNMP Trap Receiver is only used for SNMP Network Manager.
•
Set UPS Properties—sets up the Communication Type of UPS, UPS Device Name and Battery
Replacement Date.
•
Set UPS Devices Connected—sets up the connected devices name, rating and whether the
device is connected.
•
Set System Time & Time Server—sets up the System date, time and two time servers.
•
Set Web and Telnet User Account—sets up the user accounts' authority.
•
Set E-mail—sets up the e-mail accounts to receive power event notification for emergency
management.
•
Reset Configuration to Default—sets all values to their default values.
•
Save & Reboot—saves the current configuration data, including any changes made, and
reboot the IS-WEBRT3N card.
•
Exit Without Saving—Exits; no configuration changes are made.
Vertiv | Liebert® IS-WEBRT3N™ Card User Manual |
23
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Liebert IntelliSlot WEBRT3N and is the answer not in the manual?