Meter/Chart; Configuration; Ups Configuration - Vertiv Liebert IntelliSlot WEBRT3N User Manual

Cancel Test
This function aborts a test when it is executing.
Turn Off UPS When AC Failed/Reboot UPS
Selecting Turn off UPS when AC failed will turn off the UPS. You can reboot the UPS by selecting Reboot
UPS.
Put UPS in Sleep mode for __ minutes/Wake up UPS
When the UPS is put into Sleep mode, it will not provide power. The UPS will provide power after exiting
Sleep mode.
Reboot UPS
Cycles power on the UPS.
UPS Buzzer on/off
Turn on/off the audible alarm.

4.2.5 Meter/Chart

This page displays the UPS's voltage, temperature, frequency, load and capacity information as a graphic
or chart.
NOTE: To view detailed information, ensure you are using a browser that supports JAVA.

4.3 Configuration

Sub-Menu
•

UPS Configuration

• UPS On/Off Schedule
• Network
• SNMP
• SMS
• Email
• WEB/Telnet
• System Time
• Language
NOTE: This page's selection will differ according to the different interface of the UPS.
4.3.1 UPS Configuration
This page is used to set the UPS configuration. Any incorrect settings will cause incorrect display values
or disconnection between the UPS and the IS-WEBRT3N card.
Vertiv | Liebert® IS-WEBRT3N™ Card User Manual | 13