System Requirements; Dcx.server Software; Dcx.client Software; Ms-Windows (Pc) - Stute Engineering DCX.CLIENT Manual

DCX.Server/DCX.Client/DCX.NC

8 System requirements

8.1 DCX.Server software

 Computer with a wired LAN connection
 Operating system MS-Windows 7,8,10 (32 & 64 bit)
 1xUSB 2.0 port (USB-RS232 interface)
 CPU min. Intel i3 processor, 1.5GHz or faster (or adequate AMD type), 2GB RAM

8.2 DCX.Client software

8.2.1 MS-Windows (PC)

 Operating system MS-Windows 7,8,10 (32 & 64 bit)
 CPU min. Intel i3 processor, 1.5GHz or faster (or adequate AMD type), 2GB RAM

8.2.2 macOS

Operating system OS X El Capitan or higher


8.2.3 Android

Note: Use "syscheck" from the Google app store to check the requirements
 Operating system Android 5 or higher
 CPU Cortex-A Series, ARM64
 NEON technology supported
 Screen min. 680x360pixel

8.2.4 iOS

 Operating system iOS 9 or higher
 iPhone 6 or higher

8.3 DCX.NC

 Power supply 110Vac..240Vac @ 50Hz/60Hz
 Ethernet network connection (RJ45) 100Mbit or 1000Mbit

8.4 USB-RS232 interface requirements

 Min. supported baud rate: 38.400 baud
 Support of the RTS control signal
 USB 2.0 bus or higher
 Interface recommended with FTDI chip set
Note: Proofed interfaces are offered in our online store.
©Copyright 2018 Stute Engineering. All rights reserved. Subject to change.
www.stute-engineering.de
2
9