General Information; Replacing The Handset Batteries - BT BT3660 Quick Setup And User Manual

General information

Important
This equipment is not designed for
making emergency phone calls when
the power fails. Alternative
arrangements should be made for
access to emergency services.
This product is intended for
connection to analogue public
switched phone networks and
private switchboards in the
United Kingdom.

Replacing the handset batteries

After a time, you might find that the
handset batteries run out of charge
more quickly. This is a standard sign
of wear and the batteries will need
replacing.
1. Open the battery
compartment cover.
2. Lift the batteries out and
remove them. Replace with two
new AAA Ni-MH 300mAh
rechargeable batteries.
3. Replace the battery
compartment cover.
44
Caution
Don't immerse batteries in water,
throw them into a fire or dispose of
them with ordinary domestic refuse.
BT accepts no responsibility for
damage caused to your BT3660 by
using any other types of batteries.
There is a risk of explosion if
incorrect batteries are fitted.
Safety
• Only use the power supply suitable
for the BT3660. Using an
unauthorised power supply will
invalidate your guarantee and may
damage the phone. The item code
for the base mains power supply is
094096. If you've bought a
multiple pack, the item code for
the charger mains power supply
is 094096.
• Use only the approved
rechargeable batteries supplied.
Spare rechargeable batteries are
available by calling Discom on
0800 9808 999*.
• Don't open the handset (except to
replace the handset batteries) or the
base. This could expose you to high
voltages or other risks. Contact the
Helpline on 0800 145 6789*
for all repairs.