FourStar 11225136 Assembly Instructions

MODEL: 11225136
7 BIN ORGANIZER
STEP 1
STEP 1.1
ATTACH SHORT CROSS BAR (E) TO BOTTOM PANEL (B)
USING SMALL SCREW (K), THEN ATTACH BOTTOM
PANEL (B) TO SIDE FRAMES (A) USING LARGE SCREWS (J),
ATTACH MIDDLE PANEL (C) ONTO THE SHORT CROSS
BAR (E) USING WOODEN DOWEL (I), AND ATTACH
MIDDLE PANEL (C) TO THE SIDE FRAMES (A) USING
LARGE SCREWS (J) AS SHOWN.
STEP 1.2
ATTACH SHORT BAR (E) ONTO THE MIDDLE PANEL (C),
THEN ATTACH TOP PANEL (B) ONTO THE SHORT CROSS
BAR (E) USING SMALL SCREW (K), ATTACH TOP PANEL (B)
TO THE SIDE FRAMES (A) USING LARGE SCREWS (J).
THEN ATTACH LONG CROSS BAR (D) TO THE SIDE
FRAMES (A) USING LARGE SCREWS (J) AS SHOWN.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING
AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT
DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
PHILIPS SCREWDRIVER
Do you have any questions? Missing small parts or hardware? If you need
7 BIN ORGANIZER
assistance with the assembly of your
support@fourstari.com or
please e-mail our Customer Service Department at:
call us at (800) 639-3803 or (508) 473-7688
if calling locally
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
STEP 2
ATTACH BACK CROSS BARS (F) TO FINISHED PART (STEP 1)
USING SMALL SCREWS (K) AS SHOWN.
PARTS AND HARDWARE LIST
NO PARTS LIST QTY NO
A SIDE FRAME 2 PCS G SMALL BIN
TOP AND
B 2 PCS H LARGE BIN
BOTTOM PANEL
C 1 PC I WOODEN DOWEL
MIDDLE PANEL
D 1 PC J LARGE SCREW
LONG CROSS BAR
E 2 PCS K SMALL SCREW
SHORT CROSS BAR
F BACK CROSS BAR 3 PCS
STEP 3
INSERT SMALL BINS (G) TO THE TOP SHELF AND BIG BINS
(H) TO THE BOTTOM SHELVES AS SHOWN.
HARDWARE LIST QTY
A
3 PCS
G
4 PCS
4 PCS
H
14 PCS
H
8 PCS
CAUTION: MAXIMUM LOADING HARDWARE LIST
CAPACITY IS 40 LBS.
DO NOT SIT, STAND, LEAN, WALK OR
JUMP! FAILURE TO COMPLY WITH
WALL PLUG
THIS CAUTION COULD RESULT IN
PERSONAL INJURY AND/OR
PROPERTY DAMAGE!
1/4''
DRILL BIT
WALL
2 LBS
7 LBS
10LBS
WEIGHT MAXIMUM 40 LBS (18.1 KG)
D
A
G
G
H
H
QTY
2 sets
EYELET
CABLE TIE
SCREW
EYELET SCREW
WALL
PLUG
1
CABLE
WALL
TIE