Through Provisioning Server, Using Option 66 - Yamaha REVOLABS FLX UC 1000 Installation And Operation Manual

Through Provisioning Server, using Option 66

Connecting the UC 1000 to the VoIP Network using a provisioning server via
option 66
1. Configure the TFTP server name into the DHCP server option 66 string.
2. Upload the configuration file with the UC 1000 firmware bundle onto the
TFTP server identified by the DHCP server option 66 string. The device
configuration file must be named with the phone mac address.
3. When provisioning through HTTP, the option 66 string configured on the
DHCP server should be: http://<server address>
Configuration files and firmware files should be placed under http server
document root directory.
4. When provisioning through FTP, the option 66 string specified on the DHCP
server should be:
address>/user="<username>"&pass="<password>", where <username> and
<password> should be replaced by the FTP server username and password
respectively.
Configuration file and firmware files should be loaded to the FTP shared
folder where the <username> login will be prompted to.
5. No reboot of the system is required. On successful configuration, the phone
screen will display the phone number associated with the line.
6. A sample configuration file is available on the following page.
ftp://<server
29