Yamaha REVOLABS FLX UC 1000 Installation And Operation Manual page 23

Region
Region Settings is where system language and date/time settings can be
configured.
Languages can be chosen from the first dropdown menu, while the next two
menus are for choosing the region the dial tones should emulate and the time
zone to set the time based on.
Date can be set as MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD, and 24
hour time can be toggled on or off. Finally the time servers can be set and
daylight savings time can be enabled or disabled.
SIP
This menu is where the VoIP configuration settings are located for setting up
the FLX UC 1000 with the call manager. Detailed configuration for a specific
call manager is available in the Appendix.
Transport
This section allows configuration of the NAT settings for the FLX UC 1000 and
SRTP and RTP settings for security. Transport protocol information for SIP
messages as well as QoS configuration is available in this page.
Tools
Update
This screen allows the user to upgrade the device firmware for the FLX UC
1000. Download the file from the Yamaha website and either drag this
upgrade file from its folder into the box on the screen (the one labeled "Drag
and drop or click here to select a file") or click the box to select an upgrade file
from your computer.
Once a file has been selected, clicking the "Update Firmware" button will
initiate the upgrade. When the upgrade has completed, the device will restart,
and the boot-up chime will sound.
Ensure the device is not unplugged while upgrading.
Contacts
Contacts cannot be edited or viewed through the Web UI, to edit or view your
contacts, please use the "Contacts" menu accessible through the Dialer.
23