Table of Contents
Advertisement
Display setting has a slider for screen brightness, going from 1-15, and a menu
for Backlight Time, or how long the screen will remain lit before turning off.
Selecting "Never" for Backlight Time means the screen will not dim at all.
Admin Settings is the only menu on the requiring a password. The default
password is 7386, but can be changed. This is the same password to log onto
the Web UI, so changing one affects both menus.
In Admin Settings the admin password can be changed, VoIP Settings can be
set, IPv4 Settings can be set, Date/Time settings can be changed, Access from
the Web UI can be toggled, and saving Recent Call data can be turned on or off.
Turning off Recent Calls brings up a popup asking "Do you want to clear the
recent call list?"
If "Yes" is selected, all call data on the device will be deleted, and there
will be nothing saved on the device until Recent Calls is re-enabled.
If "No" is selected, the call data is saved, but no new call data is added,
and the call data cannot be accessed until Recent Calls is re-enabled.
Further down, Idle LED Color can be set, the device can be rebooted, sections
of the system configurations can be reset one by one or all together, and the
user can log out of admin mode.
Information
This menu provides the following information about the product
• Product Name: FLX UC 1000
• IP Address:
• Mac Addr:
• Base FW Version:
• Dialer FW Version:
• Dialer Serial #:
• Call 1 Statistics
• Call 2 Statistics
19
Advertisement
Table of Contents
