Surface Mount Installation - Honeywell 301C User Manual

Surface Mount Installation

It is recommended that controllers be installed 5 feet (1.5 m) above the
floor, at approximate eye level.
Mark the holes, as shown:
• Height markers 6 13/32" apart
• Width markers 10 9/16" apart
• Pre-drill 1/4" mounting holes as needed
• Securely mount the 301C using the appropriate screws
Wiring for the unit must be passed through the knock-outs provided at
the bottom of the unit.
510324
4/07
Ø
.5cm
¼"
17.4 cm
"
13/32
6
301C User Manual
Honeywell
26.8 cm
"
9/16
10
Introduction
Installation Instructions
1.5m
5'
15