Honeywell 301C User Manual page 89

The following table provides the list of data displayed for each node.
Use the right or left keypad arrows to navigate the possible nodes, then
use the up or down keypad arrows to navigate the entire list of data for
the selected node.
# Title
4. Link Quality
5. Log Mod
6. Net Addr
7. SWU slot
8. # of Parents
9. DP Id
10. DP Net Addr
11. DP LQI
12. DP Retries
13. DP BM
14. DP LC
15. AP1 ID
16. AP1 Net Addr
17. AP1 LQI
510324
4/07
Value
1 Percentage of signal strength (0-100%) for
a node, relative to parent signal quality
Log Indicates whether the node is in debug
mode
Displays the node's (hexadecimal) network
0009
address (seen in 1st screen)
1 Displays the SWU slot used to transmit
beacon
1 Displays the number of current parents for
a given node, from 0 - 3.
0 Displays the ID associated to the default
parent
0 Displays the default parent network
address
2 Displays the link quality with the default
parent:
0 = no useful link/1 = weak link/2 = strong
link
(?) Displays the number of default parent
retries
0 Displays the number of parent beacons
missed over last beacon period
256 Displays the time since lasct
communication to default parent (in
milliseconds)
(?) Displays the ID associated to the
alternative parent 1
(?) Displays the alternative parent 1 network
address
16 Displays the link quality with alternative
parent 1:
0 = no useful link/1 = weak link/2 = strong
link
301C User Manual
Honeywell
System Programming
Wireless Network Menu
Description
87