Safety Standards - fakro ARZ Z-Wave User Manual

1. Safety standards

Please carefully read the instructions below before installing the awning to avoid electric
shocks, laceration, etc.
 While installing the electric roller shutter it is essential to comply with the following
rules:
 Firstly, after unpacking, check that the roller shutter does not show any signs of
mechanical damage.
 Installation should be performed by a qualified person according to the producer's user
manual.
 Before connecting the roller shutter, make sure that the supporting voltage is compatible
with the voltage of the roller shutter mentioned on the rated plate.
 Connect the roller shutter and launch one cycle of work to verify whether it works
correctly (dual-core wire - 15V DC).
 Plastic containers used for packing should be kept out of children's reach as they pose a
potential threat.
 The roller shutter should be used only for its purpose. FAKRO is not responsible for any
damage of the roller shutter resulting from improper use.
 Any actions related to cleaning, adjusting or disassembling of the electric awning should
be preceded by disconnecting the power supply.
 Do not use any solvent-like agents, or a water jet (do not dip in water).
 All repairs should be made by a service authorized by the producer.
 The roller shutter is for external use only.
02.03.18 NC817-GB 2/7 ©2018, FAKRO