Plastic containers used for packing should be kept out of children’s reach as they pose a potential threat. The roller shutter should be used only for its purpose. FAKRO is not responsible for any damage of the roller shutter resulting from improper use.
Programming should be done with any of the remote controls available from Fakro or any remote controls equipped with the Z-Wave logo produced by other companies. Figure 1 shows a general view of the ARZ Z-Wave roller shutter with a description of the buttons and indicators.
2 sec. the device. It is performed using buttons available on the control panel of the ARZ Z-Wave roller 4. Led motor status blinking again. shutter. Warning!!! For the proper Press and hold manual control button Flashing...
2 sec. 4. Association Groups. There are three association groups in roller shutter ARZ Z-Wave: Life Line – group for position reporting roller shutter after each a stoppage and alarm reporting (overcurrent, damage encoders). This group can be a maximum 1 device.
In case of a damage the appliance should be delivered along with the Warranty Card. During the warranty period all damages and defections are recovered for free within 15 labour-days. Warranty and after-warranty repairs are made by the producer FAKRO Ltd. Quality certificate: Appliance Model..............................