User manual for awning blind AMZ Solar Contents 1. Safety standards ..........................2 2. Description ............................3 3. Programming the appliance........................4 4. Association Groups..........................5 5. Compatibility of other producers’ appliances in Z-Wave..............5 6. Z-Wave configuration parameters.....................5 7. Alarms and Notifications........................6 8. Technical parameters..........................6 9.
Plastic containers used for packing should be kept out of children’s reach as they pose a potential threat. The awning blind should be used only for its purpose. FAKRO is not responsible for any damage of the awning blind resulting from improper use.
Programming should be done with any of the remote controls available from Fakro or any remote controls equipped with the Z-Wave logo produced by other companies. Figure 1 shows a general view of the AMZ Solar awning blind with a description of the buttons and indicators.
It is performed using 2. Press and hold manual control Flashing... buttons available on the control button until reach first end position. panel of the AMZ Solar awning blind. Warning!!! For the proper 3. Press P button to confirm first end Stop flashing calibration of the device requires two position.
Multilevel Repeat – group used to transfer the received multilevel commands to the devices included in this group. This group can be a maximum 5 devices. Basic Control – group used to transfer the received commands from AMZ Solar (A, S mode) to the devices included in this group. This group can be a maximum 5 devices.
In case of a damage the appliance should be delivered along with the Warranty Card. During the warranty period all damages and defections are recovered for free within 15 labour-days. Warranty and after-warranty repairs are made by the producer FAKRO Ltd. Quality certificate: Appliance Model..............................