RetroSound Apache User Manual page 17

General Operation
Power On/Off
Press the left-front knob (#1) to turn the unit on.
will appear on the screen.
RETROSOUND
Press and hold the left-front knob (#1) to turn the unit off.
will appear on the screen to confirm that it has turned off.
GOODBYE
Volume
Turn the left-front knob (#1) to adjust the volume between 0-46.
Source Mode
Turn the left-rear knob (#2) clockwise to select from available
listening sources (selections may vary by Motor):
, ,
AUX 1 AUX 2 USB 1
(The USB source modes will not appear unless a USB device is
plugged in).
The auxiliary and USB inputs are located at the back of the radio
body. The auxiliary inputs may be used to play music from any
portable device with a standard headphone output, such as a MP3
player, iPod or iPhone
®
radio receiver. The USB inputs allow you to control iPod
play music from a flash drive (Motor 4, 6). To use these inputs, the
cables must be routed to an accessible area during installation.
Radio Tuning
Turn the right-front knob (#4) to tune to the next or previous
AM/FM frequency.
NOTE: When the radio is tuned to a strong stereo FM station, the stereo indicator will
appear on the upper right corner of the LCD screen (two oval circles).
OPERATING YOUR RADIO
, , .
USB 2 BT-Audio
, portable CD player or portable satellite
®
,
RADIO DAB/DAB+, SXM,
/iPhone
®
Copyright © 2019 Retro Manufacturing, LLC
or
®
16