Plantronics Savi W710 Quick Setup Manual

Savi W710 /W720
® ™
Welcome:
Using a Plantronics Savi headset for PC
calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer's internal microphone
and speaker.
*This picture shows the
Binaural (W720) version

Savi W710/W720 Key Features:


Manages PC, deskphone and mobile
calls from a single headset

One-touch call answer/end, vol +/-,
mute and flash across devices

Wireless freedom up to 350 feet from
your desk

Conference in up to three additional
Savi headsets

Monaural (W710), Binaural (W720)
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Savi, W710 and W720 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other
countries. Published 05.11
Quick Setup Guide
™

Getting started:

Follow the steps below to get call answer/end controls
with your Savi headset and Cisco® IP Communicator.
1. Connect your Savi base to the computer. If this is
the first time you are connecting, wait for the
installation process to complete.
2. To get call control features, please download the
latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Cisco IP Communicator to always route call
audio to the headset:
3. Click the Menu icon in the upper right corner of
the Cisco IP Communicator main screen.
4. Select the Audio Tuning Wizard option.
5. Select your Plantronics headset as the default
device for the Headset option.
6. We recommend you select your Plantronics
headset as the default device for both
Speakerphone and Handset options as well.
7. To route the ringer through your PC speakers,
select the default Windows audio device for the
Ringer option. Click Next.
8. In these next few screens you can test and adjust
listening volume and microphone level.
9. When you are finished adjusting listening volume
and microphone level, click Finish.
Note: USB configuration settings are unique for each USB
port. If you connect the headset to a different port you will
need to make these changes again to set behavior for that
USB port.
3
4
5
Plantronics Headset
Plantronics Headset
6
Plantronics Headset
7
Default Windows Audio Device