Change The Extender's Ip Address - TP-Link RE380D Manual

Modify or Remove a Device in the Blacklist/Whitelist
Launch a web browser and log into http://tplinkrepeater.net, then go to
Settings > Wireless > Access Control page.
You can modify or remove the devices in the Blacklist or Whitelist.
Modify a Device in the Blacklist or Whitelist: Click the icon
●
then enter the device name and MAC address. Click OK to save the
setings.
Remove a Device in the Blacklist or Whitelist: For one device, you can
●
click the icon to remove the device from the list. For several
devices, select them and click Delete to remove them at the same time.
Change the Extender's IP
Address
By default, the extender is set to obtain an IP address automatically from the
host router. If you want to use a specific IP address appropriate to your network
demand, please refer to the steps below.
We do NOT recommend you change the IP address unless you
are quite sure about the IP setting for special network
demand, random changes may lead to Internet disconnection.
, and Launch a web browser and log into http://tplinkrepeater.net, then go to
Settings > Network page.
Select Use the following IP address, then enter the IP address and
gateway manually.
IP Address: Enter the IP address in dotted-decimal notation

(192.168.0.254 by default).
Manage the Extended Network and Security Settings