Entertainment Adapter - TP-Link RE380D Manual

If the RE LED does not

please refer to Option ONE: Using Web
Some ISP gateways disable the WPS function by

default, if the WPS method fails, please refer to
your Web Browser.
If you are connecting the extender to a dual-band router but only
2.4GHz ( ) or 5GHz ( ) LED is on, repeat step 1) and 2) to connect
the other band.
Relocate
1) Plug the extender into an electrical outlet about halfway between
your router (Host Network) and the Wi-Fi dead zone.
2) Wait until the LED is lit with a solid blue. If not, relocate the
extender closer to the router to achieve a good (or better) signal
quality.
change from blinking to solid,
Browser.
Using
Enjoy!
The extender shares the same wireless network name (SSID) and wireless
password as your router.

Entertainment Adapter

The extender can be used as a wireless adapter to connect any Ethernet-
enabled device, such as a Blu-ray player, game console, DVR, or smart TV, to
your wireless network.
First, connect the extender to your router using Option ONE or Option TWO,
then you can connect an Ethernet-enabled device to the extender's Ethernet
port using an Ethernet cable.
By default, the Ethernet ports connect to the 5GHz wireless network. If you want
your Ethernet-enabled device to connect to the 2.4GHz host wireless network
only, please follow the steps below to finish the settings:
Launch a web browser and log into http://tplinkrepeater.net, then go to
Settings > Network page.
Connect the Extender to the Internet