TP-Link RE380D Quick Installation Manual

Quick Installation Guide
AC1200 Wi-Fi Range Extender
RE380D
Option ONE: Using your Web Browser
Option TWO: Using the WPS Button
WPS
Option ONE
Using your Web Browser
Power on
Plug the extender's adapter into an electrical outlet
near your router. Then turn on the extender and
wait until the Power LED
Configure
1
Launch a web browser and type
http://tplinkrepeater.net in the address field
and use admin (all lowercase) for both
Username and Password to log in.
http://tplinkrepeater.net
admin
admin
Login
If the login window does not pop up,
please refer to the FAQ > Q1.
Create a new username and password to
2
log in the web management page, then click
Confirm.
3
Select your country/region, then click Next.
Per FCC regulations, all Wi-Fi products markerted
in the U.S. are fixed to the U.S. region.
Relocate
Plug in the extender halfway between your router (Host Network) and
1
the Wi-Fi dead zone.
Wait for the extender to reconnect and the
2
If not, relocate it closer to the router to achieve a good (or better)
signal quality.
Enjoy!
Both extended networks share the same Wi-Fi password as your host network, but may have different wireless network names if you customize the names
during the configuration.
is lit and solid blue.
4
5
LED turns solid blue.

Connect to the Extender

via Wireless
Not connected
Connections are available
Wireless Network Connection
TP-LINK_Extender_2.4/5GHz
Connect automatically Connect
√
Disconnect the Ethernet (wired) connection to your
computer. Click the Wi-Fi icon on the taskbar and
connect to the extender's network (e.g.
TP-LINK_Extender_2.4G or _5GHz).
Select your router's 2.4GHz host network and enter
the password, then click Next.
2.4GHz Host Network Wireless Settings
Region 5GHz Host Network
Please select 2.4GHz host network or skip this network.
MAC Address
SSID Signal Security
Your router's wireless name
30:B5:C1:33:99:76
Host 2.4GHz Password: 12345678 Next
TP-LINK_123456 23:B5:C0:30:90:06
Back Other... Rescan
If you want to connect the extender only to the
router's 5GHz wireless network, please click Skip.
Select your router's 5GHz host network and enter
the password, then click Next.
If your router does not support 5GHz wireless
network, please click Skip to continue.
Host Network
For more information, please visit our website http://www.tp-link.com
via Ethernet Cable
or
1. Disconnect the wireless connection to your computer.
2. Connect the extender to your computer via an Ethernet cable.
6
Either copy the host's SSIDs or customize them
for extended 2.4GHz and 5GHz network, then
click Next.
Summary
2.4GHz Host Network
Region
Extended 2.4GHz SSID:
The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID:
Skip
The extended 5GHz password is the same as your Host password.
Verify your wireless settings and click Finish.
7
And then check the corresponding LED(s).
(2.4GHz)
Solid on
Ideal Extender Placement
Wireless Settings
5GHz Host Network Summary
Your network name Copy Host SSID
Hide SSID broadcast
Your network name_5G Copy Host SSID
Hide SSID broadcast
Back Next
(5GHz)
Solid on
Extended Network