Table of Contents
Advertisement
Haldex Modular Trailer System (HTMS) -
I-Beam Mounting (cont'd)
Slide outer brackets together
Step 7
around I-Beams.
Insert 3/8" bolts, flat washers,
Step 8
lock washers and nuts. Torque
(4) places 28-32 ft. lb.
Center Haldex Modular Trailer
Step 9
System (HMTS) between
I-Beams and torque (4) places
28-32 ft. lb.
Tighten these bolts last.
Attach hoses to appropriate
Step 10
brake chambers. Do Not Use
teflon tape on fittings. Use
liquid thread sealant sparingly
on all fittings. (Loctite PST565
or equivalent.)
For plastic ports, hand tighten fittings then rotate 1 to 1 1/2 additional turns.
Step 11
The maximum torque allowed is 210 in. lb.
Haldex Modular Trailer System (HMTS)
with Brake Monitoring System (BMS)
Installation/Service Guide (L31293W)
Center Between I-Beams
I-Beam
Inner
Bracket
3/8" Lock
Washer
3/8" Bolt
Tighten these
bolts first
Center Between I-Beams
I-Beam
I-Beam
Inner
Bracket
3/8" Lock
Nut
I-Beam
PAGE 7
Advertisement
Table of Contents
