Table of Contents
Advertisement
Haldex Modular Trailer System (HTMS)
Plumbing and Wiring - Curb Side
Sensor (1B)
Curb Side
PAGE 10
Sensor (1A)
Road Side
Front of Trailer
Curb Side View
Supply Tee Required
(Not Included)
All 3/8" Hoses
Spring Brake Chambers
Haldex Modular Trailer System (HMTS)
with Brake Monitoring System (BMS)
Installation/Service Guide (L31293W)
NOTE:
To avoid damage to power
connector, use provided zip tie
in this location to secure power
connection to ITCM ECU.
Air Reservior
(1488 cu.in. min.)
1/2" Tubing
To Rear
Trailer Supply
Red (OUT)
Trailer Wiring Harness
This connection
MUST be from
the BOTTOM of
the reservoir.
3/8"
Tubing
To RPV
From Front
of Trailer
(Nose) Supply
Red (IN)
Advertisement
Table of Contents
