I-Beam Mounting - Haldex Modular Trailer System Installation & Service Manual

Haldex Modular Trailer System (HTMS) -

I-Beam Mounting

Chock wheels.
Step 1
Drain tank.
Step 2
Remove existing panel.
Step 3
Place inner mounting brackets
Step 4
onto I-Beam.
Attach outer brackets to panel
Step 5
and loosely install 3/8"bolts and
lock washers.
Spread brackets apart.
Bracket
3/8" Weld Nut
Module Panel
Position Haldex Modular
Step 6
Trailer System (HMTS) unit
between I-Beams
PAGE 6
I-Beam
Bracket
3/8" Bolt
3/8" Lock
Washer
Haldex Modular Trailer System (HMTS)
with Brake Monitoring System (BMS)
Installation/Service Guide (L31293W)
Inner Mounting
Brackets
Outer Mounting
Brackets
Center Between I-Beams
I-Beam
I-Beam
I-Beam