Table of Contents
Advertisement
Important Notices
Product Options
The Haldex Modular Trailer System (HMTS) with Brake Monitoring System (BMS) was designed to
be used on Straight Rail or Drop Deck Single Axle Trailers.
Safety First
This manual describes the correct installation process for the Haldex Modular Trailer System (HMTS)
with Brake Monitoring System (BMS). Care must be taken during each phase of the installation in
order to ensure the system is installed and working properly.
Please follow your company's safety procedures at all times when installing this equipment.
Be sure that you understand all instructions before you begin.
Remove all air pressure and electrical power from the brake system before beginning work.
Handling Requirements
The Haldex Modular Trailer System (HMTS) with Brake Monitoring System (BMS) requires proper
handling prior to and during installation. The HMTS should NEVER be lifted by way of tubing,
electrical cables or any components. Lifting MUST only be done by way of the panel itself or the
two attached I-beam brackets. Failure to do so may result in loose components and subsequent
leakage, leading to panel function degradation or failure.
Questions?
If you have any questions on this product or any of the innovative products offered by Haldex,
contact your local distributor for complete details. Technical Service or Troubleshooting help can
be obtained by calling Haldex Technical Services Department at 800-643-2374, Press 2.
The products described within this literature, including without limitation, product features,
specifications, designs, availability and pricing are subject to change by Haldex and its subsidiaries at any
time without notice. This document and other information from Haldex, its subsidiaries and authorized
distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information
concerning the product or system, in the current literature or catalog. Due to the variety of operating
conditions and applications for these products or systems, the user, through their own analysis and
testing, is solely responsible for making the final selection of the products and systems and assuring that
all performance, safety and warning requirements are met.
Haldex Modular Trailer System (HMTS)
with Brake Monitoring System (BMS)
Installation/Service Guide (L31293W)
Advertisement
Table of Contents
