Installa On Of Your Alarm - Kidde WFP User Manual

0313-7201-00_(PWFPH_B_L)_PEUK_V10.qxp:_
5. INSTALLATION OF YOUR ALARM
Ribs (2
places)
Mounting Option 1
Mounting Option 2
2015.12.3
OPTION 1 - Easy mount to drywall only;
1. Choose a mounting location (wall or ceiling) and drill a 5mm
hole through drywall.
2. Insert the provided screw through the mounting plate aligning
the ribs on the screw with the slots on the mounting plate.
3. Tighten the screw/mounting plate to wall or ceiling until it is
Slots
snug against surface. DO NOT over-tighten.
OPTION 2 - Mounting onto other Surfaces
1. Choose a location (wall or ceiling) and using the mounting
plate provided as a template, mark three hole locations.
2. Install the three provided screws through the mounting plate
and tighten. DO NOT over-tighten screws (if mounting in
plasterboard or similar surface, drill 5mm holes and use the
plastic anchors provided). Anchors are not required for
mounting on hard surfaces such as wood.
2:55 PM Page 6
6