Intended Usage; Safety Instructions - Silvercrest SKF 2300 A16 Operating Instructions Manual

Cool-Zone
Deep Fat Fryer

Intended Usage

The deep fryer is intended for use in private house-
holds, for frying foodstuffs. It is not intended for use
in commercial or industrial environments.

Safety instructions

Risk of electrical shocks.
• Connect the appliance to a mains power socket
delivering a voltage of 230 V ~ 50/60 Hz.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
• Ensure that the power cable never becomes wet
or moist during operation.
Never submerge the operating/heating element
and the housing with the power cable in water,
and do not clean these components under
running water.
Risk of fire!
• Do not use the appliance in the vicinity of hot
surfaces.
• Do not leave the appliance unattended when in
use.
• Do not use an external timing switch or a separate
remote control system to operate the appliance.
• NEVER melt solid fat (fat in blocks) in the deep
fryer. The heating element may be damaged
by the high temperature and there is a risk of
fire! Melt the fat beforehand in a saucepan or si-
milar.
NEVER use water to extinguish the
fire!
• Old or dirty fats and oils can spontaneously ignite
themselves if overheated. Change the oils or fats
in good time. In case of fire, remove the power
plug from the wall and smother the burning fat
or oil with a damp towel or fire blanket.
Risk of personal injury!
• This appliance is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
• Ensure that the appliance stands with a safe and
secure positioning.
• Do not operate the appliance if it has sustained
a fall or is damaged. Arrange for the appliance
to be checked and, if necessary, repaired by
qualified technicians.
• During the frying process hot steam is generated,
especially when the lid is open. Keep a safe
distance away from the steam.
• Ensure that all parts are completely dry before
pouring oil or liquid fat into the deep fryer.
Otherwise, hot oil or fat could splatter out.
• Carefully pat all foodstuffs dry before placing
them in the deep fryer. Otherwise, hot oil or fat
could splatter out.
• Be especially careful with frozen foodstuffs.
Remove all ice particles. The more ice there is
on the foodstuff, the more the hot oil or fat will
splatter.
• Some parts of the appliance become very hot
during operation. Touching these may cause
serious burns.
- 2 -