Connecting The Ps/2 Mouse - Belkin ErgoFit P74278 User Manual

HARDWARE INSTALLATION

Connecting the PS/2 Mouse

PS/2 in Windows 98, Me, 2000, and XP
1. Turn off your computer.
2. Connect the USB-to-PS/2 connector to the mouse cable
on the receiver.
3. Insert the cable with the connector to the PS/2 (6-pin)
mouse port on your computer.
4. Place the batteries into the mouse.
5. Turn the computer on.
6. When the computer finishes starting up, it will automatically
detect the mouse and make it functional.
NOTE: If the mouse does not work, please see instructions under
"Synchronizing your Mouse to your Receiver".
7. When your mouse is properly connected, you can start the
software installation.
5